Single Tube Short Wave Infrared Emitters

Gold Coating

White Plating

Clear without any coating

Single Tube IR Lamp Specifications

FEATURES & BENEFITS

· Highly Efficient Heat Source 
Over 85% of the input energy is converted into infrared energy.

· Ease of Control 
As opposed to combustion heat energy, our light source based energy is easier to control and manipulate by use of lenses and reflectors.

· Compact and Clean Energy 
A non-polluting heat source from a light weight and compact footprint enables flexible design possibilities.

· Instant On/Off 
Due to the ability to reach maximum output upon ignition, a sophisticated heating programming can be applied.

· Long Life and Consistent Output 
By utilizing the halogen cycle, QUICKLY's lamps are designed up to 5000 hrs with almost no loss in infrared output.

· Flexible Production Capability 
QUICKLY supports customer specified custom design and OEM support. 

What is Short Wave Infrared Heater Lamps

This is made up high-purity clear quartz twin tube, each tube has Heating Coil of Tungsten material which runs in U shape in the tube which is filled with halogen gas.This provides a very high energy source capable of responding instantly to voltage changes, allowing for precise temperature control for a variety of applications.

About Our Company 

Hefei Quickly Electric Co.,ltd is a manufacturer of high quality Quartz electric heating elements. We proudly manufacture every elements we sell. Every element is manufactured from high quality materials sourced from both domestic and foreign suppliers. We make the finest quality elements in the market. 

Our oven for coating/reflector on quartz tube drying

RFQ

1.Why Quartz Glass as the one main of material?

The choice of quartz glass is not a coincidence: this extraordinary material is totally transparent at IR radiation, can withstand constant working temperatures of more than 1000°C and it is resistant to chemical corrosion.

2.Typs of Quartz tubes

Quartz uses two kinds of quartz tubes: single tube and twin tube. The twin tube provides the best mechanical resistance, thanks to its reverse "H" shape, and it allows to manufacture emitters up to 6,5 meters in length.

3.Why Reflector

All of our emitters can be coated with a layer of gold or ceramic as reflectors. The gold/ ceramic coating can concentrate the heat, increasing the effectiveness of the heat output. 
The emitters with coating are highly economical, converting practically all the consumed electrical power into heat

For the emitters with high watt density or the surface temperature of the tube above 800°C , we suggest to use ceramic coating as reflector because the temperature resistance is up to 1000°C 

In addition to 180° (half-tube) coating, we also manufacture 270° coating or other customer specified degrees.

4.could you supply clamps for lamp installing ?

Yes, we will provide mounting clamps for clients, and the corresponding clamps quantity with purchased lamps are supplied freely bu us.

5.The lamp can be used in vertical Orientation?

Yes, it can be used in vertical basides in horizontal position,see as the below picture

The first step in designing or purchasing a Quartz element is determining if it is mounted in a horizontal or vertical position. Typically, Quartz elements are mounted in a horizontal position. This is the simplest design. However, some applications require the element to be in a vertical position. The only difference that makes in the design of the element is that the element coil cannot be stretched; it must be tightly wound such that it can support itself in a vertical position. This requires additional processing on the coil to form an insulating coating on the wire so there is no electrical contact between the turns of the coil. Vertical or Close Wound coils are not a problem for us. We can make these in any length, but due to the more stringent physical specifications of the coils, some designs may not be possible. Note: A minimum purchase is required for these elements due to the extra processing required.

6. What information i need to confirm before sending inquiry

Input Voltage, Wattage, Overall Length ( including ceramic base), Heated Length,  Tube Diameter, Reflector Type, Lead wire (length); 

If this is a new project, show me information such as : what material the lamps will be used to drying or heating , oven size,  required working temperature, limited time, speed, voltage...

7. How does your factory do quality control

" quality is priority", we always and keep paying more attention to QC from the material purchasing to the lamps' packing. Our product have gained CE, ROHS, ISO9001.

8. How you do lamps package?

9. How To make the shipping and payment?

10. How to contact us

ADD : C34, Jia Hai Industrial Park, Xin Bengbu Road, Xinzhan District, Hefei City, Anhui, China 230012

TEL : 86-551-65208999

FAX: 86-551-65218999

Whatsapp: 86-13767487075

Skype : cathy1993_wang